Fibaro FGS-223 - Z-Wave Plus FGS-223 Dual Switch Module
search
  • Fibaro FGS-223 - Z-Wave Plus FGS-223 Dual Switch Module

Fibaro FGS-223 - Fibaro FGS-223 Dual Switch Module Z-Wave Plus

€48.99
VAT included

Fibaro FGS-223 module Z-Wave Plus dual switch .

Volume discounts

Quantity Unit discount You Save
2 3% Up to €2.94
3 5% Up to €7.35
5 7% Up to €17.15
7 10% Up to €34.29
Quantity

  Garanties sécurité

(à modifier dans le module "Réassurance")

  Politique de livraison

(à modifier dans le module "Réassurance")

  Politique retours

(à modifier dans le module "Réassurance")

Fibaro FGS-223 module Z-Wave Plus dual switch .

The Fibaro FGS-223 Z-Wave Plus module allows electrical devices to be controlled in switching mode and can connect behind an existing switch.

Be careful, this module requires neutral to work. The output is not free of potential, so it does not allow to control a dry contact or a load with a supply voltage other than the input.

The Fibaro FGS-223 Z-Wave Plus module works as an ON/OFF switch.

The Fibaro FGS-223 Z-Wave Plus module has the power and energy measurement function to control your consumption.

The Fibaro FGS-223 Z-Wave Plus module has a terminal block for wiring cables of high cross-section.

The Fibaro FGS-223 Z-Wave Plus module has a status LED to check the inclusion, signal strength, module update.

You can update the FGS-223 module software.

The Fibaro FGS-223 Z-Wave Plus module incorporates many safety measures that protect it from voltage drop, overheating or overload.

The Fibaro FGS-223 Z-Wave Plus module allows you to set the upper and lower thresholds for power consumption. Once the limit is exceeded, the module can notify you or automatically deactivate the device. 

Features Fibaro FGS-223 module: 

  • Control two lights/devices remotely

  • Installs behind an existing switch

  • ON/OFF function

  • Integrates the Z-Wave 500 series chip

  • 250% faster communication compared to standard Z-Wave devices

  • Built-in scene activation mechanism

  • Security Communication and Notification Classes

  • Configuration menu with a diode

  • Measuring the energy and power of connected devices

  • Supports secure mode (Z-Wave Network Security) encrypted with AES-128 encoding

  • Integrated Z-Wave Network Coverage Tester

OTA software update (depends on controller)

Larger terminal blocks for easy wiring

Rounded shape to meet the highest standards

Use back and forth

Use instead of a teleswitch

Small, discreet and aesthetic

Ease of use and installation

  • Module Type: Z-Wave Receiver

  • Power supply: 100 - 240V~, 50/60Hz

  • Wiring: 3 wires, neutral required

  • Max power: 6.5A per channel, 10A total (resistive load only)

  • Frequency: 868.42 Mhz

  • Transmission distance: 50m free field, 40m indoors

  • Signal strength: 1mW

  • Dimensions: 42.5mm x 38.25mm x 20.3mm (L x W x H)

  • Operating temperature: 0-35°C

  • Standards:

    • EMC 2014/30/EU

    • RED 2014/53/EU

    • RoHS 2011/65/EU

    • LVD 2014/35/EU

FGS-223

Data sheet

Protocol
Z-WAVE
Functions
Actuator

Specific References

chat Comments (1)
Grade
No customer reviews for the moment.