Pack automation Eedomus More Fibaro FGR-222

Pack EEDOMUS lights composed of a box EEDOMUS MORE and three modulesFibaro FGR-222

The box EEDOMUS is MORE powerful and incorporates the audio.

The Box home automation EEDOMUS PLUS an embedded chip Z-Wave Plus+ and consumes only 1 watt maximum.

The Box EEDOMUS PLUS is compatible with most devices Z-Wave.

You can consult the list here.

Lae module EVERSPRING AN179 allows you to control a circuit of the light or other device in ON / OFF mode

Features BOX EEDOMUS MORE:

• New processor/memory/storage for performance that is 10 times higher (details to come)

• Smart Z-Wave+ 5th generation integrated

• Electronic completely redesigned, with a limited consumption to 1W.

• Built-in speaker

• Full compatibility with the features and extensions to existing

• Processor ARM CORTEX-A8 1 Ghz

• Memory 512 Mb DDR3

• Storage 4 Gb eMMC

• Ethernet 10/100Mb

• 2 USB Port

• 4 connectors wired

• Speaker 1W+micro

Characteristics module Fibaro FGR-222 :

The new micromodule FGR-222 will enable you to manage the drives pane to the stop electronic, venetian blinds or even garage doors with the protocol Z-Wave, while keeping your existing switch. Therefore, you will be able to operate the motor connected by using the existing switch, a transmitter Z-Wave or directly from the button on the micromodule.

In addition, this micromodule is capable of transmitting the power consumption instant (W) and cumulative (KWh) of the equipment that is attached to it.

The micromodule Fibaro FGR-222 is an evolution of the FGRM-222. It now has blocks larger to accept two cables of 1.5mm2. Its rounded shape enables it to meet the safety standards of the country's most stringent.

A Z-Wave controller (remote control, dongle, etc.) is necessary in order to integrate this module into your network if you already have an existing network.

Each module Z-Wave device works as a wireless repeater with the other modules, in order to ensure a total coverage of your dwelling.

Note : This module requires the neutral to work.

• Power supply : 110 - 240V~, 50/60Hz

• Power consumption : < 0.8 W

• Wiring : 3-wire, neutral required

• Max load :

  • 4.2 A for resistive loads

  • 1.7 A for motors with compensated power factor (inductive loads)

• Frequency : 868,42 Mhz

• Signal power : 1mW

• Transmission Distance : 50m free field, 30 m indoors

• Dimensions: 20 x 42 x 38 mm

• Operating temperature : 0-40°C

• Temperature limit : 105°C

• Standards :

  • RoHS 2011/65/EU

  • LVD 2006/95/EC

  • EMC DIRECTIVE 2004/108/EC

  • R&TTE DIRECTIVE 1999/5/EC