Popp thermostatic valve wireless Z-Wave.

The thermostatic valve Z-Wave POPP allows you to set the desired temperature easily from a wireless switch, a heating plan, a stage of automation, or from the outside via your smartphone.

The thermostatic head Z-Wave POPP allows the control of the thermostatic head with the help of its built-in buttons.

In addition to the direct control of the temperature, the thermostatic head Popp design and modern features of heating modes special such as

the frost protection or energy-saving mode. A small LCD displays the setpoint temperature on request.

The device has an internal scheduler, which allows you to define up to 9 setpoints for up to 7 days of the week.

Once programmed, these instructions will be activated without any other manual interaction or wireless.

Other smart features are the detection of open window with suitable passage in power saving mode or the function

training of the valve to ensure that it is still operational after long periods of inactivity.

The device must wirelessly connect a regular controller, or the box home automation IP to an update of the internal clock and the exchange

of status messages.

The device uses the built-in temperature sensor to transmit the exact value of the temperature at the controller/box home automation.

You are now able to analyze the temperature directly of the thermostatic head and thus increase the accuracy of your

control of the temperature.

Features valves Popp :

• Replace the thermostatic head of the heater

• Ordering your heater remote

• Manual Thermostat

• Energy saving

• Ease of installation

• Ease of use – three buttons only

• Great comfort

• Function window open

• Function antigommage (anti-seize compound to the valve)

• PID control (precise control)

• Adaptive learning

• Weekly programs with feedback to the set point adjustable

• Battery life : 2 years

• Temperature min./max.

• Need to take a child

• Vacation/absence

• Frost Protection

• Backlit display

• Set Points variable ; up to 3

• Alert Messages : "battery low" and " no signal "

• Lowering the temperature by increments of 0.5°C

• Support the latest SDK the Z-Wave V4.55

• Compatible with RA2000 and M30x1.5

• Type of module : Slave Z-Wave

• Power supply : 2 batteries AA 1.5 V

• Consumption :battery life: 2 years

  • Sleep : 3µW
  • In operating mode : 1.2 W

• Frequency : 868,42 Mhz

• Range: up to 30m indoor, and 100m in free field

• Display : Digital, backlit

• Temperature range : 4-28°C

• Connection Type radiator : RA and valves with fittings M30X1,5

• Dimension :protection rating : IP20

  • Length : 91 mm
  • Diameter : 51 mm

• Weight : 177g (Batteries included)

• Compliant standards : CE, RoHS, WEEE, certification Z-Wave