Wall outlet dimmer POPP 123597

The wall jack POPP 123587 is a wall plug dimmer that can be placed between the wall outlet (F, B, PL, CZ) and electric devices.

The wall jack POPP 123597 supports all the loads of inductive and resistive up to 300 W and capacitive loads up to 100 W.

The switching is controlled by a wireless device using the protocol Z-Wave or locally via a button.

A LED indicates the switching status.

The wall jack POPP can be programmed to off, change or turn following the triggering of a sensor or a clock.

The drive can be used to help babies and young children to find sleep. (The appliance has a child safety on the terminals are high voltage and can therefore be safely used in close proximity to child care facilities). When the function is activated, a double-click on the button ,switches the drive to an adjustable value. Over a longer period of time - say 30 minutes - the drive control the light slowly until the value set previously is reached.

Type E(France ) Type Schuko(Germany)

Features:

• Circuit controlled by power relay
• Voltage supply 220 ... 240 V, 50 ... 60 Hz
• Maximum load: resistive and inductive: up to 300W,capacitive: up to 100W
• Dimensions: 52 mm (width) X 72mm (depth) x 100 mm (height)
• Weight: Schuko - 168g; EN - 171g; GB - 163g
• Authorized in the backgrounds humidity : 10 .. 85% RH
• Operating temperature: 0 ... 49 ° C according to UL217
• Corresponds to the latest specification for Z-Wave (SDK4.x)
• Frequency: 868,40 MHz
• Efficiency RF transmitted: 1 dBm
• receiving sensitivity: -102 kbits / s dBm@9.6
• Signal range : 100m
• Supports the reconfiguration of the network: "Part Explorer" and the inclusion wide network