Dualtech TS100 transmitter GSM IP backup RTC View larger
choozeo

Dualtech TS100 - GSM communicator IP backup RTC

TS100

New product

Dualtech TS100 transmitter GSM IP backup RTC

More details

By buying this product you can collect up to 18 loyalty points. Your cart will total 18 loyalty points that can be converted into a voucher of 3,06 €.


livraison

183,26 € tax incl.

ou 3 fois 61,09 €

ou 4 fois 45,82 €

More info

Dualtech TS100 transmitter GSM IP backup RTC

The TS100 manages the telephone line connected to a transmitter and provides if need a different path for a GSM network : placed between the transmitter and the telephone network, it routes in the event of a line break, the call via the GSM.

The TS100 can also transmit the information to break the line by an SMS message. The TS100 is equipped with a GSM modem which must be equipped with a SIM card with a subscription to analog (normal).

The TS100 is compatible with most transmitters of the trade.

The receiving bays are not to be modified.

New features :

  • Dual Band 900/1800 MHz

  • Cyclic testing GSM • Output remotely controlled

  • Programming by telephone

  • Real-time clock incorporated

  • Reading of the remote programming

The TS100 control the state of the telephone line and immediately provides a communication path via the GSM network in the event of a line fault.

The TS100 is very easy to install and can be connected to any type of alarm system. It is compatible with most of the receiving bays.

In normal situation, the alarm transmitter is connected to the PSTN network.

It is through the line of the public network that are transferred to the alarm messages to the central monitoring station.

In case of the loss of PSTN line, the transmitter is connected to the GSM modem of the TS100 : the calls from the transmitter are directed to the GSM.

The TS100 continuously monitors the state of the PSTN line and in case of default, generates information that can trigger the transmitter.

The call will be routed via the GSM network.

In addition, the TS100 control continuously the quality of the connection to the GSM network. In case of a decrease of the signal, an output failure is enabled. All of the programming contained in the SIM card, using a mobile phone.

The TS100 also allows you to send SMS messages.

Characteristics of the Dualtech TS100 :

ENTRIES:

  • "PSTN Input" : Line PTT
  • "SW/AL Input : Trigger an SMS message with preprogrammed or failover on the GSM network
  • "Supply Input" : Power supply 12 VDC (10-25 VDC)

OUTPUTS

  • "Supply Output" : Output 12 VDC
  • "GSM Output" : direct Access to the channel's GSM TS100 by a telephone handset
  • "Line Output" : Output line to an alarm transmitter.
  • "PSTN Error" : Output line fault. Appearance or disappearance of OV
  • "GSM Error" : Output default GSM Appearance or disappearance of OV
  • "Tamper Output” : Self-protection "O/C OUT : Output-controlled Appearance or disappearance of OV

SETTINGS (Switch configuration)

  • DIP1&2 : Programming timer default RTC
  • DIP3&4 : Programming timer default GSM
  • DIP5 : appeal Period max. on GSM (no limit / 10 minutes)
  • DIP6 : Outputs alarm nc/NO
  • DIP7 : Mode table switching (the TS100 ignore the 1st digit dialed)
  • DIP8 : Indication light / normal the light indicates the signal strength of the GSM network setting Mode of positioning of the GSM antenna or the TS100 ignores the 2nd digit dialed • Power supply : 10-25 VDC. • Presentation in white metal case • power Consumption : 200 mA at rest • Comes with 1 antenna – remote transmission GSM : 350 mA is approximately + cable 2 meters

Reviews

No customer reviews for the moment.

Write a review

Dualtech TS100 - GSM communicator IP backup RTC

Dualtech TS100 - GSM communicator IP backup RTC

Dualtech TS100 transmitter GSM IP backup RTC

Download