FORTREZZ - Input/Output Module Z-Wave MIMOlite
Input/output Module controllable by Z-WAVE.
Our e-commerce site is secured by SSL
Free delivery from €100 to Relay points with Mondial Relay or DPD
You have 14 days to withdraw
Input/Output Module Z-Wave MIMOlite.
This mold allows you to connect all devices non - Z-WAVE - device-home automation Z-WAVE.
The module MIMOlite can be controlled to give you information on an output dry contact or provide you with a input dry contact to give information z-wave.
It also allows you to recveoir or transmit a signal in the form of a voltage.
Features:
-
Input/output Module Z-Wave
-
Turn a device wired into a device the Z-Wave
-
Do share your alarm system with your home automation network Z-Wave
-
Connect playback devices pulse
-
Connect an analog sensor 24V
-
Button to include/exclude the module
-
1 analog/digital
-
1 potential-free output (independent of input)
-
Power supply : 9-24 v dc or 9-18VAC from a power supply @ ~ 300mA
-
Frequency : 868,42 Mhz
-
Transmission Distance : 50m free field, 30 m indoors
-
Input Signal 1 (SIG1): digital or analog Input 0 to 24v DC or 16 Hz max for pulse count (a minimum of 32 ms). The trigger levels and hysteresis can be set via the command class configuration for the two ends.
-
Impedance of the input signal : The input impedance for SIG1 is Z = 66 ohm at 10KHz. This impedance is = 66 ohms = 34 ohm + j 540uH.
-
Relay 1 output : DPDT, Power, switching max of 120W; 10uA to 10A.
-
Dimensions : 85mm x 64mm x 30mm
-
Weight : 100 grams
-
Operating temperature : -10 °C to +70 °C
-
Standards : ETSI EN 300 220