Wall plug-in switch POPP 123627

The wall jack POPP is a wall plug switch that can be placed between the wall outlet (F, B, PL, CZ) and electric devices.

The wall jack POPP supports all loads up to 3500 W.

The switching is controlled by a wireless device using the protocol Z-Wave or locally via a button.

A LED indicates the switching status.

The wall jack POPP can be programmed to turn off or turn on following the triggering of a sensor or a clock.

Type E(France ) Type Schuko(Germany)

Features:

• Circuit controlled by power relay
• Voltage supply 220 ... 240 V, 50 ... 60 Hz
• Maximum load: 3500W
• Dimensions: 52 mm (width) X 72mm (depth) x 100 mm (height)
• Weight: Schuko - 159g; FR - 162g; GB - 156g
• Authorized in the backgrounds humidity : 10 .. 85% RH
• Operating temperature: 0 ... 49 ° C according to UL217
• Corresponds to the latest specification for Z-Wave (SDK4.x)
• Frequency: 868,40 MHz
• Efficiency RF transmitted: 1 dBm
• receiving sensitivity: -102 kbits / s dBm@9.6
• Signal range : 100m
• Supports the reconfiguration of the network: "Part Explorer" and the inclusion wide network