Warning: Last items in stock!
By buying this product you can collect up to 13 loyalty points. Your cart will total 13 loyalty points that can be converted into a voucher of 2,21 €.
|2||134,52 €||Up to 8,32 €|
|3||131,75 €||Up to 20,80 €|
|5||128,97 €||Up to 48,54 €|
The ODROID-M1 is a single-board computer with a wide range of useful peripherals developed for use in a variety of embedded systems applications. Versions of 8 GB RAM and 4 GB RAM are available.
The processor has four ARM Cortex-A55 processors with low power consumption and high-efficiency operation at 2 Ghz.
A larger 8GB LPDDR4 DRAM is available.
Petitboot pre-installed in the 16 MB of built-in SPI-Flash memory makes it easy to manage various operating system and kernel versions and supports booting from microSD, eMMC, NVMe, SATA and USB storage devices.
A standard-sizeD 22 mm x 80 mm M.2 NVMe storage device can be installed directly on the ODROID-M1 card.
A single native SATA 3.0 (non-USB) port is provided for use with a 2.5-inch HDD or NAND SSD storage device. The four-way MIPI-DSI port can be directly connected to an LCD panel.
The two-way MIPI-CSI port can be directly connected to a camera sensor module.
Since machine learning is a trend in this industry, there is a neural network processing unit (NPU) that can provide up to 0.8 TOPS on the M1 single-board computer.
A sleek and cool blue M1 metal case kit is an option available to protect your ODROID-M1 card.
Rockchip RK3568 Quad-Core Cortex-A55 32-bit 1.992 GHz (ARMv8)
4GB or 8GB (depending on the model chosen) of LPDDR4 RAM
GPIO x40 header
Micro USB 2.0 port
x2 USB 2.0 ports
x2 USB 3.0 ports
RJ45 Ethernet port (10/100/1000)
HDMI 2.0 port
Native SATA 3.0 port for use with a 2.5-inch HDD or NAND SSD storage device
The M.2 NVMe storage device is of type M-Key PCIe3.0 2 lane standard size 22 mm x 80 m
SATA power supply (5 volts only)
3.5mm audio jack port
Mono speaker output (1.3W at 8 Ω)
MIPI CSI 2-way
MIPI DSI 4-way
SPI Recovery Switch
16 MB SPI Flash
UART for System Console
x2 system LED indicators and M.2 LED indicator
Built-in infrared receiver
Power and reset jumpers
DC power outlet
PSTN battery backup holder with DC plug (DC input: 7.5V~15.5V)
Dimensions: 90 mm x 122 mm x 16 mm
ODROID-M1 compatible with ODROID-M1 metal housing
We recommend powering your ODROID-M1 with a good quality 12V/2A power adapter.
No customer reviews for the moment.