Fibaro FGD-212 - dimmer module Z-WAVE+

FGD-212 module Z-WAVE MOST of FIBARO to control a circuit by ON/OFF mode and variation.

The module FIBARO FGD-212 can be installed behind a interrupteuren mode two-wire without neutral or on the lighting circuit-mode three-wire phase,neutral and ground.

The module Z-WAVE+ FGD-212 automatically detects the connected load.

The module Z-WAVE+ FGD-212 indicates the instantaneous power consumption in Watts, and total KWh of the circuit connected.

The module Z-WAVE+ FGD-212 accepts different load

Mode drive :

• Light Sources traditional incandescent and halogen lamps powered in 230VAC
• Lamps halogen 12V (with electronic transformers)
• Lamps halogen 12V (with transformer ferromagnetic)
• LED lamps variable
• Lamps CFL fluorescent variables
• Use of the Bypass with a light source with adjustable intensity up to 225VA in 2-wire connection (depending on the type of load)

In that mode switch :

• Fluorescent lamps
• LED lamps
• Use the Bypass with any light source compatible up to 225VA (depending on the type of load)

Characteristics module FGD-212:

• Type of module : Receiver Z-Wave

• Power supply : 230V +/- 10%, 50Hz

• Wiring : neutral not required

• Max load : 25-250W (resistive load) or 1.1 A (inductive load)

• Type compatible lamp (dimmable) : Incandescent, compact fluorescent, Halogen (230VAC and 12VDC with transformer electronic), LED

• Type compatible lamp (non-dimmable) : compact fluorescent, LED

• Frequency : 868,42 Mhz

• Transmission Distance : 50m free field, 30 m indoors

• Dimensions : 42.5 x 38.25 x 20.3 mm

• Operating temperature : 0-35°C

• Temperature limit : 105°C

• Standards : RoHS 2011/65/EU LVD 2006/95/EC, EMC 2004/108/EC, R&TTE directive 1999/5/EC