Vision Security ZP3102 GEN5 - motion Detector Z-Wave More
VISION SECURITY ZP3102-5 PIR motion detector Z-Wave More
Our e-commerce site is secured by SSL
Free delivery from €100 to Relay points with Mondial Relay or DPD
You have 14 days to withdraw
VISION SECURITY ZP3102-5 PIR motion detector Z-Wave More
Motion detector ZP3102 VISION SECURITY (PIR = Receiver passive infrared) to prevent the presence of a person in a dwelling house or any premises.
The motion detector ZP3102 'sends information to all controllers or any other device Z-Wave partner.
Up to 4 motion sensors ZP3102 can be controlled from this unit.
The motion detector also works as a temperature sensor.
The installation can be done with screws or double sided tape.
The device works on battery power and in sleep mode unless an intrusion is detected.
The motion detector ZP3102 can send state information after a sleep time programmable. The batteries can be changed without disassembling the device.
The motion detector ZP 3102 emits a visual warning and sends a warning to the Z-Wave controller, when the battery needs to be replaced.
A safety switch protects the device from removal or manipulation by an intruder.
Battery CR123 Lithium lasts 3 to 5 years depending on the normal operating conditions.
The device supports the inclusion Z-Wave normal , the automatic inclusion and inclusion system-wide for convenient handling
The content of the product includes the device itself, the battery, adhesive tape and an instruction manual.
Features ZP3102-5 :
-
Power supply : 1 battery 3V Lithium CR123A
-
Frequency: 868.42 MHz
-
Transmission Distance : 30m
-
Display : LED
-
Detection Angle : 120°
-
Detection Distance : 2 to 10m
-
Operating temperature : -15 to 40°C
-
Dimensions : 62 x 85 x 50mm
-
Z-Wave Certification : US ZC08-11040004 / HAD ZC08-12100006
- IP20