Wiser CCT50100002W - Zigbee dimmer module

The Wiser CCT50100002W dimmer module is used to switch and dim resistive, inductive or capacitive loads.

The Wiser CCT50100002W drive module should not be used to control safety related applications.

Order Options

Home control: To control the micromodule via the Wiser app, you will need the Wiser gateway.

Room control: To control the micromodule through other Wiser devices, it can be paired.

Wiser devices must be in the same Zigbee network.

Direct operation:

The Wiser CCT50100002W dimmer module can always be controlled directly on site.

To do this, you can connect a maximum of 10 mechanical push buttons.

Functions

• Automatic load detection

• Thermal protection, overload resistance, short circuit protection

• Soft start/stop

Features Wiser CCT50100002W -Zigbee dimmer module:

• Rated voltage 220-240 V AC, 50/60 Hz

• Nominal power Dimming channel 1

• Standby Maximum 0.4W

• Operating temperature 0 ºC to 35 ºC

• Neutral conductor Not required

• Connection terminals Maximum 2 X 2.5 mm2 , solid or twisted types

• Extension units Maximum 10 mechanical push buttons

• Length of all cable sections Maximum 50 m for 3-wire NYM cable

• Protection by fuse 16 A circuit breaker

• Operating frequency 2405 - 2480 MHz

• power max. transmitted radio frequency <10 mW

• Protection class IP20

• Product dimensions (H × W × Depth) 43 X 43 X 22 mm

• Dimensions of the wall box

• The minimum depth of the wall box must be 26 mm.

• Zigbee 3.0 certified